The Rough Material Cutting Method Used For Acrylic Watch Display Stand

acrylic watch display stand

The rough material cutting method is an important method used for acrylic watch display stand manufacturing. The engineer from Shenzhen Responsy Display Company would like to introduce you about this process.

1. Rough material cutting is a process that will cut a whole acrylic board (normally 2440mm*1220mm or 2500mm*1500mm) into several pieces we need.

2. During the cutting process for the acrylic display stand, the cutting error is an important aspect that should be paid attention to. Because the blade of the cutting machine has some thickness, so we need to make sure the acrylic board should be large enough on its size.

3. Actually, we will use 2mm thickness saw blade is used for acrylic board within 20mm thickness; thicker than 20mm acrylic board should use 3mm blade.

4. We need to cut larger size acrylic board then we need, because we need to leave enough area for the later process like polishing.

5. Laser cutting machine is now the most accurate cutting machine used for acrylic watch display stand cutting. Its cutting error is smaller; and its cutting edge is neat and orderly. In addition, its speed is fast, it can improve the manufacturing efficiency.

In general, cutting process is the first process during and acrylic watch display stand process, the above processes are helpful methods for acrylic cutting methods.