What is electroplating? Electroplating through the use of the role of external DC, electrolysis in the solution to make one metal attached to another metal, giving the metal surface gloss and beauty, anti-rust objects to prevent wear; improve conductivity, lubricity, strength, heat resistance and weather resistance.
As the electroplating is by the electrolytic ion attached to the plated object, so the object to be obscured, or there will be partial electroplated objects yellow phenomenon, not only affect the appearance, but also easy to rust, so plating display stand design need to avoid design blind spots.
First, do not overlay two or more metal plates when designing large plates, because metal ions adhere to the surface of the metal plate during electroplating, and the interlayers will not be plated, so it is can be Rusty, life cycle is not long, and easy to cause customer complaints.
The second point, the design of R angle not too small, at least larger than 75 °, because the R angle is too small will lead to the phenomenon of electroplating less than the corner. If the edge of the product has a sharp corner, customers are advised to trim at least a surface of not less than 0.25mm. Not to mention the R corner plus a blocking factor, as shown in the circular plating display, there was such a design error.
Third, the plating of the display are the best to have a layer of wax, why the plating display to a layer of wax it? Electroplating rack wax to watermark, more bright. In addition it can delay the unavoidable dead time in the electroplating process.
Fourth, the cost of electroplating and hanging has a great relationship, because the hanging decides the placement of electroplating objects, the placement of objects determines the plating efficiency and plating effect. Therefore, when choosing a hanger, it is easier to achieve the plating efficiency and quality by comparing the hanger hanging method.
Comments
Post a Comment